Vacuum Hot Press Sintering Furnace with Quartz Tube and Water-Cooled Flange

• Customization: Available
• Application: School, Lab
• Customized: Customized
• Model NO.: OTF-1200X-VHP4
• Structure: Portable
• Material: Steel
• Type: Tubular Furnace
• Selaing Flange: Water-Cooled Flange
• Tube Material: Quartz Tube
• Warranty: One Year
• Transport Package: Wooden Box
• Specification: dia. 100mm
• Trademark: CY
• Origin: Zhengzhou
• HS Code: 851410900
• Production Capacity: 210 Sets Per Month

Product Description

Vacuum Heated Pressing Furnace up to 1100ºC with 4"Quartz Tube and Water Cold Flange - OTF-1200X-VHP4   
 
The OTF-1200X-VHP4 is designed for making dense compound materials under both vacuum & high pressure, and/or bounding multi-layer wafer together under a pressure up to 5 metric tons.    It is integrated with  split vertical tube furnace with a vacuum-sealed 4" quartz tube and  40T electric hydraulic press, as well as one sets of 0.5" ID  graphite pressing die.   The furnace can be heated up to 1100ºC using a temperature controller with 30 programmable segments. Water cooled flanges facilitates a vacuum level up to 10E^-5 torr via use of a turbomolecular pump.
 
Specification:
 

Max. Pressure	6 metric tons ( 10 MPa on pressure gauge ) limited by 0.5" graphite pressing die Warning:   Higher pressure  may damage 0.5" die.  If you may higher pressure , please contact us to reduce ID of pressure die
Hydraulic  Pump	Built in electric hydraulic pump with Max. load capability of 40 metric tons. Cylinder size 25 mm in diameter. Movable distance: 15mm Automatic max. pressure controller
Vertical Furnace	Splitable vertical furnace heated by Ni-Cr-Al resistance wire Max. working Temp>           1200oc < 60 minutes Continuous working temp:    1150oC Max. Heating Rate:            < 10oC/minute Heating zone length: 12" ( 300mm ) 30 segment programmable controller with +/-1ºC accuracy RS485 port installed for remote PC operation Power consumption: 2200W Power input: 208 - 240VAC, 50/60 Hz single phase
Quartz Tube & Sealing Flange	One quartz tube 100 OD x 94 IDx 640L mm (4" x 25") is included  Water cooled flanges are installed on two ends of tube with KF-25D vacuum port & pressure gauge as well as a 1/4" gas inlet port with SS needle valve  12L/minute water flow is required, using a recirculating water chiller to save water Max. achievable vacuum level: 10E^-5 torr by molecular pump
High Temperature Pressing Die Set (Optional)	Two graphite pushing rods are built in. ( bottom left picture ) One set of 0.5" ID  graphite die are included for immediate use. The high temperature die kit is usually made of high purity graphite with max. working pressure of 50 MPa The graphite pressing die gets broken easily and is consumable,   Mica spacers are used to adjust the height of die sets (while providing heat insulation).
Dimensions	1050mm(L) x 750mm(W) x 1750mm(H)
Net Weight	365 kg
Weight of Shipment  & Dimension	450kg 48"x40"x83"
Warranty	One year limited standard warranty