| Customization: | Available |
|---|---|
| Application: | School, Lab |
| Customized: | Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| System Structure |
Aerosol Generation: 2.4MHz Ultrasonic Enhanced Bubbler can "evaporate" catalyst liquid with literally no heat generated. A stainless steel liquid collector connects inline with the ultrasonic bubble can prevent condensing liquid from streaming into the furnace tube chamber. Thermal Decomposition: Tube Furnace can be heated up to 1200C maximum. By passing the droplets flux across the temperature and atmosphere regulated firing zone, chemical, and physical conversion processes proceed. Nanopowder Collection: 50KV, 2'' O.D tubular designed electrostatic precipitator (1.2L) can effectively collect nano-size particles from the carrier gas flow |
|
| Tube Furnace - Thermal Decomposition |
Voltage & Power | Single Phase, 208V~240V AC, 50/60 Hz (30A breaker required) Max. 3 KW |
| Working Temperature | 1100oC continuous 1200 oC Max. < 1 hours |
|
| Max. Heating / Cooling Rate | < 20oC / min | |
| Heating Zone & Constant Temperature Zone | 12" total heating zone length 3" ( +/- 1 oC ) constant heating zone |
|
| Heating Elements | Fe-Cr-Al Alloy doped by Mo | |
| Temperature Controller |
PID automatic control, 30 programmable segments for precise control of heating rate, cooling rate and dwell time. Built-in over temperature alarm and protection allows for operation without the attendant. +/- 1 ºC temperature accuracy. RS485 Communication Port. |
|
| Processing Tube | High quality fused quartz tube is included for operation @ 1200C. (I.D: 44mm x OD: 50 mm x 1200 mm length). | |
| Sealing Flanges & Fittings |
Left sealing flange with 1/4'' feedthrough, needle valve and mechanical pressure gauge. A 1/4'' O.D x 17'' L alumina tube is inserted into the main chamber. It can deliver the aerosol to the hot zone directly. Right KF50 quick disconnect flange provides direct coupling for the electrostatic precipitator. Water cooling feature can be added with additional fee applied. |
|
| Aerosol Generation | Utrasonic Enhanced Bubbler |
110VAC, 2.4 MHz Ultrasonic Generator Fluoropolymer coated liquid container and Fluoropolymer sealing gaskets external Fluoropolymer optical sensor and valve for keeping the liquid level to the correct height and preventing damage to the nebulizing element, should the unit run dry. Ultrasonic power programmable,0~100%, 5% increment. You may choose 120KHZ ultrasonic spraying system at a lower cost |
| Mass Flow Controller | An MFC is included to control the carrier gas flow rate. | |
| Condensing Liquid Collector |
316 stainless steel made container, 150ml Two SS needle valves with 1/4" Tube Fittings The cap is attached to the body with quick disconnect clamp. This allows easy removal of components for cleaning |
|
| Nanopowder Collection | High Voltage Supply |
AC 220V 50/60Hz, 50 W Max. power consumption Digital Voltmeter and Current meter, 50KV, 1.0 mA max. Output voltage and current can be set by using knobs on the front panel and read from the digital display Constant current/Constant Voltage mode of operation Built-in Arc Protection Circuit |
| Tubular Electrostatic Precipitator | Negative charged circular mesh plate and Positive charged 1'' O.D x 170mmL Al tube collector are built into a transparent 2'' O.D x 450mm L-quartz tube The use of KF50 quick clamp and flange enables the quick coupling to the furnace processing tube Adjustable balance supports keep the collector leveled with the furnace tube |
|
| Net Weight | 180Kg | |
| Shipping Dimensions | 48"x40"x62" | |
| Shipping Weight | 500 lbs | |
| Warranty | One year limited manufacturer warranty with lifetime support | |
| Compliance | CE Certified | |
){kind=link}