| Customization: | Available |
|---|---|
| Type: | Li-ion Battery |
| Cathode Material: | NCA |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Working Voltage | 208 - 240 VAC, 50/60 Hz, Single Phase | |
| Max. Power Consumption | 6 KW ( 50A Air breaker required ) | |
| Compressed Air | 0.5-0.8 MPa is required Attention: If a gas cylinder is used instead of air compressor, a two-stage pressure regulator must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. |
|
| Reeling/Unreeling Diameter | 250mm O.D Max. | |
| Coating Width | 1) Doctor Blade: 180mm; 2) Slot Die:150mm; 3) Micro-Gravure: 180mm | |
| Coating Heads(please select in the Product Options) Doctor Blade Slot Die Micro-Gravure |
Doctor Blade Coating (Reverse Comma Blade) |
Two available coating modes (continuous and intermittent) selectable on the control panel. Coating thickness range: 10~200um ( dried film ) Coating width and length: 180mm W x 5000mm L Max. (single side coating) Typical slurry viscosity range: 500~10000 mPa.s Precision: ±5μm MSK-155 auto-slurry feeder with 2 liters tank is available at extra cost |
| Slot Die coating |
The slot die is perfect for uniform film coating of 1 micron and up to 300-micron thickness. By changing the shim size with various patterns, you would be able to produce continuous, intermittent, or even grid coatings that match the shim patterns. MSK-156 slurry feeding screw pump with 4 liters tank is included, please click underline to view details Minimum thickness & precision: 1 µm ( dried film ), ±1% Coating width and length: 150mm W x 5000mm L Max. (single side coating) Typical slurry viscosity range: 200~10000 mPa.s Attention: The final coating thickness is dependent on a wide range of parameters such as slurry viscosity, solid particle size, solid content, shim thickness, foil rolling speed and slurry feeding rate. Therefore, we are not able to guarantee that 1-micron level film is achivable for all kinds of slurries. For further discussion, please let us know your slurry specs and coating thickness requirement. |
|
| Micro-Gravure Coating |
Continuous and intermittent coating mode are available for the user. Coating thickness range: 2~3um ( dried film ) Coating width and length: 180mm W x 5000mm L Max. (single side coating) Typical slurry viscosity range: 30~2000 mPa.s MSK-155 auto-slurry feeder with 2 liters tank is included |
|
| Drying Mechanism (please select in the Product Options) Convection Heating Infrared Heating UV Curing |
Convection Heating | Air flow rate:3.3/2840 ( cm³/min @ RPM ) max., flow rate adjustable Drying temperature: 150°C max. Power Consumption: 3KW max. Heater length: 500mm |
| Infrared Heating | Drying temperature: 150°C max. Power Consumption: 2.1KW max. Heater length: 500mm |
|
| UV Curing | The power and wavelength of the UV lamp can be customized according to customer's specific requirements. Heater length: 500mm |
|
| Film Lamination/ Calendering (Optional) |
The system can be integrated with lamination machine which laminates the ion exchange membrane/separator film onto the cathodes or anodes as the film rolls out. Calender is also an option besides the laminator in the case that a higher coating density with reduced film thickness is required. Roller size: Φ150x200mm Roller surface: , Ra<0.4, circular runout +/-2um Hardness: ≥HRC60 Material: Chromium plated stainless steel Dual micrometer for accurate thickness adjustment in the range 0.5 - 2 mm Note: Heatable rollers (max. 100C) are available upon request. |
|
| Product Dimensions | L1260mm x W850mm x H1600mm | |
| Compliance | CE Certified All electric components | |
| Warranty | One Year limited warranty with lifetime support | |
){kind=link}