| Customization: | Available |
|---|---|
| Application: | Industry, School, Lab |
| Customized: | Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Working Pressure vs. Working Temperature | 200 Bar max. at 650°C 140 Bar max. at 800°C 80 Bar max. at 900°C 40 Bar max. at 1000°C 2.5 Bar max. at 1100°C Never heat up above 1200°C |
| Working Gases | Inert gas and oxygen No hydrogen or any flammable gas |
| Heating Temp. | 1100°C max.for < 1hr <=1000°C for continuous |
| Heating Rate | ≤10°C/min |
| Heating Element | Fe-Cr-Al Alloy doped by Mo |
| Heating Zone | Three heating zones: 150mm + 150mm + 150 mm Total heating zone length: 450mm Constant temp. zone: 280mm ±1°C |
| Temp. Control | Three precision digital temperature controllers with 30 segments programmable PID control method with protection of over-temp. and thermal couple broken Temperature stability: ±1°C PC control software and interface are included for PC operation Three Omega K type thermocouples were implemented in the furnace |
| Process Vessel | Nickel based super-alloy GH747 (Click to download GH747 nickel based alloy data sheet) OD 85 x ID 50 x Length 1000 (mm) |
| Positive Pressure Sensor | One digital pressure gauge with over-pressure alarm is installed in high pressure flange Pressure Measurement Range: 0~15Mpa |
| Flange and Fitting | A pair of 63mm CF type flanges is included (w/ high pressure valve and 1/4 tube fitting) 2 pcs Copper o-rings (99 O.D x 82 I.D x 2.2mm) are included ( spare copper O-ring is available as consumable ) One pair of water cooling ring , made of copper tube , is installed on two ends of the tube ( > 10 liter / min water flow is required) |
| Positive Pressure Sensor | One digital pressure gauge with over-pressure alarm is installed in high pressure flange Pressure Measurement Range: 0~15Mpa Click picture below to see detail |
| Temperature Gradient |
This furnace is able to achieve a temperature gradient up to 19 °C / inch (150 °C / 200 mm )if the conditions below are satisfied: Center zone is heated up to 1000 °C Side zones remains idle |
| Voltage | AC 208 - 240V 50/60Hz |
| Power | 4 KW (30A breaker required) |
){kind=link}