| Customization: | Available |
|---|---|
| Customized: | Customized |
| Structure: | Desktop |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Features Designed & Made in USA |
Sealing Mode (Top,Side and vacuum ): MSK-115-III with Rubber Sealing blade and Manual Footswitch is specially designed for hot sealing the top side of the pouch cell with the tab extruded. Unlike hard type sealing blade, the soft type sealing blade is able to eliminate the sealing gap caused by the battery taps. Vacuum Sealing Mode: After electrolyte injection, MSK-115-III is also able to perform the final vacuum sealing for the pouch cell. Vacuum Standing Mode: After the vacuum sealing, MSK-115-III is able to do the vacuum standing for the electrolyte diffusion and degassing. The vacuum timer would be used for the standing time control. |
| Max. Sealing Dimensions | 200mm(L) x 150mm(W) |
| Edge Sealing Width | 5mm |
| Sealing Blade | Soft type (with rubber, suitable for sealing case with tab in between) |
| Power Supply | 110V or 208-240V selectable, Single Phase 50/60Hz |
| Max. Power | 600W |
| Vacuum Level |
-90 kPa Max. The vacuum pump is not included.. |
| Sealing Pressure |
0~7Kg/cm² adjustable: Vacuum chamber lid and sealing die to need to be driven gas, Recommended driven gas pressure 60 psi. Please use high purity inert gasses (Ar or N2), when operating in the glovebox. Using Air Compressor driven when operating outside the glove box. Air Compressor and fitting are not included |
| Sealing Temperature | 50 - 250°C adjustable with control accuracy of +/-2°C |
| Heating Timer | 0 - 99 seconds Adjustable |
| Glove Box Compatibility |
KF40 Feedthrough with all necessary wire and tube are included to allow operating inside Glove box, which has KF40 port Please use Inert gas when operating in the glove box. Such a Feedthrough ensures air-tightness of glove box |
| Compliance | CE Certified |
){kind=link}