| Customization: | Available |
|---|---|
| Type: | Ceramic Heating Equipment |
| Certification: | CE, TUV |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Working Pressure Temperature |
Pressure calculation based on safety factor 3 for 6000 hours service life 200 Bar max. at ≤800°C 150 Bar max. at ≤900°C 100 Bar max. at ≤1000°C 50 Bar max. at ≤1100°C |
| Working Gases | Inert gas and oxygen No hydrogen or any flammable gas |
| Heating Temp. | 1100°C max.for < 1hr 1000°C for continuous |
| Heating Rate | ≤10°C/min |
| Heating Element | Fe-Cr-Al Alloy doped by Mo |
| Heating Zone | Two heating zones: 200mm + 200mm Total heating zone length: 400mm Constant temp. zone: 175 mm ±2°C |
Temp. Control |
Three precision digital temperature controller with 30 segments programmable PID control method with protection of over-temp. and thermal couple broken Temperature stability: ±1°C PC control software and interface are included for PC operation |
| Positive Pressure Sensor |
One digital pressure transducer installed in high pressure flange One pressure controller is included. the release valve will automatically open when pressure reach setting pressure. Pressure Measurement Range: 0~15Mpa |
| Process Vessel | Nickel based super-alloy GH747 (Click to download GH747 nickel based alloy data sheet) Φ70 OD × Φ35 ID ×526 L mm, Normal Capacity: 500 ml Attention: Processing Tube is consumable part Optional torque wrench is available here to avoid over-tighten the flange bolts. |
Flange and Fitting |
A pair of 63mm CF type flanges is included (w/ high pressure valve and 1/4 tube fitting) 2 pcs Copper o-rings are included ( spare copper O-ring is available as consumable. The flange is cooling by forced air via aluminum heat-sink |
Optional Parts ( with extra cost ) |
You may order Heavy Duty Rotary Vane Vacuum Pump (7.8 CFM -240 L/m) - EQ-YTP-50 for experiment under vacuum condition Please consider the Turbo-molecular Vacuum Pump Station (up to 1E-7 mbar) - EQ-PV-HVS2 for high vacuum level Gas flow control system is available upon request ( see picture below right ) |
| Voltage | AC 208 - 240V 50/60Hz |
| Power | 3 KW (20A breaker required) |
| Dimension | 900×600×1330 mm |
){kind=link}