| Customization: | Available |
|---|---|
| Application: | Industry, School, Lab |
| Customized: | Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-pressure stainless steel reactor / digestion tank / PTFE liner / high temperature hydrothermal reaction reactor
Product Description Product Name: hydrothermal synthesis reactor
Kettle body material: 304 stainless steel
Lining material: polytetrafluoroethylene
Maximum pressure: 3MPAG
Safety performance: acid and alkali resistance, no leakage
Specifications: 25ML, 50ML, 100ML, 150ML, 200ML, 250ML, 500ML
Working temperature: less than 220 degrees
Mode of use: external heating mode
Rise and fall temperature: less than 5 degrees /min
Warm reminder: please don't cool down the cooling water after heating. If you don't use this product, please clean the water stains of the reactor.
I. Product introduction:
It is a high-pressure digestion tank used in the oven, also called a sample dissipator, a pressure-dissolving tank for digestion, and PTFE.
High-pressure tanks and hydrothermal synthesis reactors are used to rapidly digest insoluble materials by using strong acid or alkali and high temperature and high pressure in an enclosed environment. It is a useful assistant to digest samples when determining trace elements and traces of playmakers.
2, Product features:
The safe temperature is 220 degrees, the maximum pressure is 3MPA;
The kettle body of this product is made of 304 stainless steel, with PTFE inner liner, double layer care, and acid and alkali resistance. It has the advantages of reasonable appearance, reasonable structure, easy operation and good corrosion resistance.
3, Product application:
It is an ideal product for sample digestion and treatment in scientific research fields such as university laboratories, environmental monitoring, and health and epidemic prevention quality supervision.
4,Operation method:
1. Pour the reactants into the PTFE liner and ensure that the feed coefficient is less than 0.8;
2.To ensure that the position of the gasket under the kettle body (protruding face down), and then into the PTFE liner and pad Sheet, first tighten the lid of the kettle, and then use the screw to tighten the kettle cover;
3. Place the hydrothermal synthesis reactor in the heater and raise it to the required reaction temperature according to the specified heating rate (less than the specified safe use temperature);
4. When it is confirmed that the temperature in the reactor is lower than the boiling point of the solvent in the reactant system, the kettle lid can be opened for subsequent operations.
When the reaction is completed and it is cooled down, it must also be operated strictly in accordance with the specified cooling rate in order to facilitate security and countermeasures.
The service life of the kettle;
5. After confirming that the temperature in the reactor is lower than the boiling point of the solvent in the reactant system, first loosen the lid with a screw, then open the lid of the kettle;
6. Clean it in time after use to avoid rust.
We should pay special attention to the cleaning of the sealing line of the kettle lid line and prevent it from damaging.
Pictures:
){kind=link}