| Customization: | Available |
|---|---|
| Customized: | Customized |
| Structure: | Desktop |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Working Voltage | 208-240V AC, 50/60 Hz, Single Phase |
| Max. Input Current | 34 Amp (Min. 40A breaker required) Power cable included (It is suggested to use NEMA L6-50P twist-lock plug with 10AWG power cable) |
| Output Frequency | 30-80 kHz |
| Heating Current | 200-600 Amp |
| Maximum Oscillating power | 15 KW |
| Max. Input Power | 7 KW |
| Duty Cycle | 80% |
| Max. Distance Between Heater and Controller | 2m |
| Max. Sample Weight | 1 kg |
| Control Station |
Automatic timer control or Manual control selectable Manual Control: by Foot Pedal Automatic Heating Time: 1-99 Seconds Automatic Dwell Time: 1-99 Seconds Automatic Cooling Time: 1-99 Seconds One Port is built in to connect to the temperature controller and thermal couple, which can control temperature automatically via optional control unit. Please click the picture below to order at extra cost. |
| Air Cooling | Rear Fan |
| Water Cooling |
Flow rate: 2~5 L/Min Pressure: 0.2 MPa (29 Psi) Protection: Over-pressure and over temperature switch Tap water is acceptable, but using Recirculating Water Chiller is highly recommended |
| Induction Coil & Accessories | Two coils with the following dimensions are included: Coil #1:76.8mm(OD) x 66.0mm(ID) x 40mm(H) Coil #2:82.5mm(OD) x 65.5mm(ID) x 73.5mm(H) Foot Pedal with Cable and water connector are included |
| Display | Digital display shows output power and current |
| Product Dimensions | Control Station: 18" x 8" x 17" Heating Station: 12" x 8" x 13" |
| Warranty | One Year limited warranty with lifetime support |
| Temperature Controller (Options) | In order to enable the temperature control function of this induction unit, please order the temperature controller |
){kind=link}