Tube Furnace, Tube Furnace with Ultrasonic Spraying, Tube Furnace with Electrostatic Precipitator manufacturer / supplier in China, offering Tube Furnace with Ultrasonic Spraying and Electrostatic Precipitator Upto 1800c for Special -Particle Formation, New Design Desktop Large Automatic Vacuum Spin Coater, Dual Function Soft Metal Sintering Furnace for Zirconia Blocks and Alloy Disc and so on.
|Min. Order:||1 Piece|
|Production Capacity:||20 Sets/Month|
|Payment Terms:||T/T, Western Union|
|Tube Furnace||Voltage:AC220/50HzMax. 2.5KWWorking temper:1750ºCMax.heating rate:5ºC / min ( T< 1600ºC); 2ºC / min ( T>1600ºC)Heating Zone:300mmConstant Temperature Zone:75mmHeating element:4pcs MoSi2 HeaterHeating Tube:I.D 44mmxOD50mmx1200mm lengthTemperature Controller:PID automatic control via SCR (Silicon Controlled Rectifier),30 programmable segments|
10.temperature accuracy:+/- 1 ºC
|1.Left sealing flange with 1/4'' feedthrough, needle valve and mechanical pressure gauge. A 1/4'' O.D x 17'' L alumina tube is inserted into the main chamber. It can deliver the aerosol to the hot zone directly.|
2.Right KF50 quick disconnect flange provides direct coupling for the electrostatic precipitator
|Aerosol Generation||Utrasonic Enhanced Bubbler|
·220V 2.45MHz ultrasonic generator
·Ultrasonic power programmable,0~`100% increment
·304 stainless steel T-piecewith 1/4'' tube fitting adapters enables the use of carrier gas.
Mass Flow Controller
One MFC is employed to control the carrier gas flow rate.
It is very important that the gas flow must be controlled <100SCCM in order to minimize the thermal shock impact on the furnace tube.
Condensing Liquid Collector
·316 stainless steel made container, 150ml
·Two SS needle valves with 1/4" Tube Fittings
·The cap is attached to the body with quick disconnect clamp.
|High Voltage Supply||·220VAC Single Phase, 15W max.|
·Digital Voltmeter and Current meter, 30KV, 0.5mA max.
·Output voltage and current can be set by using knobs on the front panel and read from the digital display
·Constant current/Constant Voltage mode of operation
·Built-in Arc Protection Circuit
|Tubular Electrostatic Precipitator||·Negtive charged circular mesh plate and Positive charged 1'' O.D x 170mmL Al tube collector are built into a transparent 2'' O.D x 450mm L-quartz tube|
·The use of KF50 quick clamp and flange enables the quick coupling to the furnace processing tube
·Adjustable balance supports keep the collector leveled with the furnace tube
|Warranty||One year limited manufacturer warranty with lifetime support (Consumable parts such as furnace liner, processing tubes, and O-rings are not covered by the warranty)|