| Type: | Electrostatic Spraying Equipment |
|---|---|
| Application: | Hardware Spraying Equipment, Wood Spraying Equipment, Plastic Spraying Equipment, Porcelain Spraying Equipment |
| Coating: | Paint |
| Certification: | CE, ISO |
| Method Type: | Automatic |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier CY-UAM6000 Ultrasonic Spraying Machine
The CY-UAM6000 ultrasonic spraying machine uses ultrasonic high-frequency oscillation to atomize the liquid into uniform micron fruit particles. Compared with the traditional nozzle, the ultrasonic nozzle can obtain uniform, thin and controllable film spraying and spray pyrolysis, and it is not easy to block the nozzle. Since the ultrasonic nozzle requires a small amount of gas of kPa, the paint utilization rate is 95%. Ultrasonic spraying machines are being applied to thin film solar cells, fuel cells, semiconductor photoresists, electronic sensors, PCB aids, non-woven functional coatings, glass coatings and other film preparation. The UAM6000 ultrasonic sprayer combines new spray and control techniques to design spray heads and custom complete ultrasonic spray equipment for customers based on treatment, spray granules, spray volume and other process requirements.
|
Ultrasonic refueling method: focusing linear refilling |
|
|
Spray shape after refilling: focusing straight type |
|
|
Low-pressure air is ejected from the nozzle orifice, and the spray liquid is sprayed from the outer conduit to the nozzle surface to produce fine liquid particles. |
|
|
Suitable for coatings such as implantable instruments, stents and electronic components |
|
|
The spray is gentle and low speed, and it can be sprayed directly to the target position. |
|
|
The ultrasonic air pressure nozzle has no obstruction and reduces paint waste |
|
Ultrasonic refueling method: Focused refilling |
|
|
Spray shape after aeration: Focused beam type |
|
|
Ultrasonic atomizing nozzle combined with low pressure air to produce a soft and focused droplet spray |
|
|
Suitable for energy electronic battery coating |
|
|
The spray is gentle and low speed, and can be sprayed directly to the target position. |
|
|
Make ultrasonic nozzles less prone to blockage and reduce downtime |
|
Acoustic wave refilling method: wide type refilling |
|
|
Spray shape after aeration: divergent fan shape |
|
|
Mainly using high-speed impact air jet control, air flow controllable |
|
|
Aerated for spraying non-woven fabrics, glass and other mobile coils |
|
|
Controlled ultrasonic atomizing spray for uniform coatings to reduce paint waste |
|
|
Make ultrasonic nozzles less prone to blockage and reduce downtime |
Ultrasonic spraying equipment features:
• Spray uniformity and high controllability
• Not easy to block the nozzle
• High raw material utilization and reduced waste
• Any nozzle can be unloaded
• Self-developed 6-axis controller
Ultrasonic spray application
• Three-dimensional spraying
• Plane spraying
• Moisturizing
• Spray drying
• Dust reduction
Parameter
|
Name |
UAM6000 Fuel cell spraying machine |
|
Frequency |
50khz-120khz |
|
Average particle size |
10-40μm |
|
Flow |
30ml/min |
|
Spray uniformity |
<2% |
|
Ultrasonic nozzle |
Can be equipped with a variety of ultrasonic nozzles |
|
Viscosity |
<20cps |
|
Spray width |
80mm |
|
Spray range |
350*500mm |
|
Input power |
220V AC 50/60Hz |
|
Whether to refill |
Yes |
|
Air pressure range |
0.1μpa-0.3μpa |
|
Control System |
Six-axis control system |
|
Overall size |
1400*900*1600mm |
|
Total Weight |
650kg |
|
Operating Voltage |
220V |
|
Mounting aperture |
≥25mm |
|
Power consumption |
0.2A |
|
Rated power |
3kw |
High frequency ultrasonic spraying characteristics
• Compared to low-frequency nozzles, droplets produced by high-frequency vibrations are relatively fine, penetrating and adherent, and can be evenly attached to the object being sprayed.
• Quantitative spraying of sprayable liquids reduces waste and excessive spray.
• The nozzle is not easily blocked due to high frequency vibration.
• All titanium alloy atomizing heads, nozzles can be customized.
Pictures:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}