Customization: | Available |
---|---|
After-sales Service: | Online Video |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Max. Pressure | 20T |
Hydraulic Electrical Presser |
Hydraulic pump cylinder diameter 100mm, movable stroke 45mm |
Induction Heater | Working voltage: 380 VAC, 50/60 Hz, three phase. Working current: 60 A (with a 60 A breaker). Maximum input power: 25 kW. Output frequency: 30 ~ 80 kHz. Duty cycle: 80%. Max. Working Temperature : 1600 ºC max duration time: < 30 min. Air cooling: fan. Protection: water pressure monitoring, high-temperature protection, and overpower protection. |
Temp. Controller |
PID mode temperature control With over-temperature disconnection protection Temperature control accuracy ± 10 ºC Type B thermocouple with protective sleeve |
Processing chamber & Sealing Flange |
Stainless steel vacuum sealed chamber: 260 × 230 × 305 mm (OD × ID × L). Flanges on both ends of the chamber. Flanges have a tunnel for cooling water. Equipped with a KF-25D vacuum port, pressure gauge, 1/4" gas inlet port with stainless steel needle valve. The upper flange can be lifted by raising the lead screw which provides the easy access to retrieve the graphite die. Requires at least 55 liters per minute water flow. window vertically (and not inclined) and at the same level as the object being pressed |
Digital Pressure Gauge | Maximum pressure display is upto 20T |
High-Temperature Graphite Pressing Die Set |
Two built-in graphite supporting rods. One set of graphite die are included for immediate use. |
Dimensions | 1000mm X 820mm X 1600mm |
Gross Weight | 480 kg. |
Application Notes | Attention: the gas cylinder must have a two-stage pressure regulator to limit the pressure below 3 psi for safe operation. |
Warranty | One year limited standard warranty |