Split Type Max Dual Sliding Rtp Tube Furnace for Molybdenum Disulfide (MOS2) Research

• Customized: Customized
• Structure: Desktop
• Material: Steel
• Certification: CE, TUV
• Application: Lab
• Type: Heating Type
• Model NO.: CY-1200-80IIIC
• Heating Zone: Three
• Heating Rate: 20c/Min.
• Vacuum Sealing Flange: Stainless Steel
• Gas System: Mass Flow Meter
• Warranty: One Year
• Transport Package: Wooden Box
• Specification: OD. 80x1400mm
• Trademark: CY
• Origin: Zhengzhou, China
• HS Code: 85141090
• Production Capacity: 140 Sets/Month

Product Description

split type Max Dual Sliding RTP Tube Furnace for molybdenum disulfide (MoS2) research
This set of equipment is split vacuum tube furnace and the front end is equipped with pre - heater heated to 400 ºC, the auxiliary sulfur powder evaporation, the rear end of the dual-zone curing oven, precise temperature control, easy to operate. .The left side is equipped with a flange support,preheater and sulphur furnace can be used separately.Right side is equipped with atmosphere micro-adjustment device,which can accurately reflect the gas pressure in the chamber.The regulating valve with a scale,used for low pressure CVD, is very practical and good repeatability.

 Technical parameter
 

Furnace  Construction	Double layer steel casing with air cooling  High purity alumina fiber insulation for max. energy saving  Splitable cover for easy tube replacement
Power  Consumption	5 KW
Input Voltage	AC 208-240V Single Phase, 50 or 60 Hz
Maximum  Temperature	1200 C
Continuous  Temperature	1100 C
Maximum  Heating Rate	<= 20 C /min
Heating Zone  Length	Three zones: (880mm, 35" in total) Zone 1: 220mm (8.6" ) Zone 2: 440mm (17.3") Zone 3: 220 mm (8.6")
Constant  Temperature  Zone	If three zones are set at the same temperature, constant temperature zone  is 25"  (625 mm) long with a temperature discrepancy of +/- 1oC. If using only one zone (center zone), constant temperature zone is 4.3"  (110 mm)  long with a temperature discrepancy of +/- 1oC.
Temperature  Accuracy	+/- 1oC
Heating  Elements	Fe-Cr-Al Alloy doped by Mo
Temperature  Controller	Three precision temperature controllers to control three zones separately. PID automatic control with 30 programmable segments for precise control  of heating rate, cooling rate and dwell time. Built in overheating & broken thermocouple protection. Over temperature protection and alarm allows for operation without  attendant(s). +/- 1 C temperature accuracy. RS485 Communications Port..
Quartz Tube&  Sealing Flanges	80 mm O.D x 72 mm ID. x 1400 mm fused quartz tube included.  Vacuum flanges with valves and pressure gauge are included.  Thermal block must be placed inside tube as the drawing below
Vacuum Sealing  Flanges	Two stainless steel flanges with both vacuum gauge and valves included. Min. vacuum pressure achieved by mechanical pump is 5.5 m-torr.  ( 5.5x10^-3 torr).  The pressure can reach 10^-5 torr by using mechanical + molecular pump. Leaking rate is < 5 m-torr / min. and stable vacuum pressure after 24 hours  is < 2 torr.
Oxygen Monitoring	An Oxygen Sensor can be used to monitor the oxygen level of gas(es) used  in CVD systems  for preventing or reducing oxidation. Please click the picture below to  learn more:
Vacuum Pump	120 L/m Rotary Vane Vacuum Pump is included with max. vacuum pressure  of 10^-2torr. Stainless steel hose tube is included for connecting to tube  furnace.
Gas Flow Meter  and  Pressure Meter	Three gas flow-meters (4% accuracy FS) are installed inside the mobile case  to  enable monitoring of gas flowing rates  Compact direct read flow meter, 10-100 cc/min. Compact direct read flow meter, 16-160 cc/min. Compact direct read flow meter, 25-250 cc/min.
Valves	Four stainless steel valves are installed in the side panel of mobile cart to  control mixing of three inlet gases separately
Dimensions	Furnace: 1100 X 450 x 670 mm Bottom Mobile case: 600x600x597 mm

Package



Service
1. Factory prices with the best quality.
2. One year free-of-charge maintenance for all the dental equipment
3. Customized service for special demand
4. Fast and flexible delivery, by sea, by air, by express
5. Quick response within 24 hours
How to order
1. If you are interested in our products, please tell us the model number and quantity.
2. We will make a proforma invoice for your order.
3. We will deliver the product ASAP on receipt of the payment
Guarantee
1. Guarantee for one year after shipment.
Payment
1. Western Union
2. PayPal
3. Secure Payment through Alibaba
4. Telegraphic transfer
5. L/C

Factory

Zhengzhou CY Scientific Instrument Co., Ltd is mainly engaged in the research and development, design, manufacturing and sales of equipment used in scientific researches. Independence and innovation is the company's tenet.Our main products include: tube furnace, muffle furnace, plasma cleaner, vacuum furnace, atmosphere furnace,CVD system and customized lab equipment.Welcome you come to visit us. 


Exhibition