The Only Fully Automatic and Manual Dual Control Mode Small Spray Dryer in China

• Customization: Available
• Heating Mode: Transmission
• Material Status: Powder, Solution
• Atomization: Gas Atomization
• Flow: Parallel Flow
• Heat Source: Electricity
• Type: Pressure Spray
• Intake Air Temperature Control: 30c~300c
• Outlet Temperature Control: 30c~140c
• Evaporation Water Volume: 1500ml/H~2000ml/H
• Minimum Feed Amount: 50ml
• Total Power: 3kw/220V
• Tower Wall Purge Device: Material Recovery Is Higher
• Spray Head Cooling Unit: Optional
• Transport Package: Wooden Box
• Specification: Equipment size: 1200mm*650mm*500mm
• Trademark: CYKY
• Origin: Zhengzhou, China
• HS Code: 85141090
• Production Capacity: 200

Product Description

The only fully automatic and manual dual control mode small spray dryer  in China
 

Small spray dryer product description:
The small spray dryer is mainly used in the production of micro-particle powder in universities, research institutes and food and pharmaceutical chemical enterprises. It has broad-spectrum applicability to all solutions such as emulsions and suspensions, and is suitable for drying sensitive heat sensitive materials such as biological products, biological pesticides, enzyme preparations, etc., because the materials sprayed are only subjected to high temperature when sprayed into mist-sized particles, so they are only heated instantaneously, which can maintain the active material in dry hind still maintain its active ingredients are not destroyed.

Small spray dryer product application:
Food, pharmaceuticals
Milk powder, egg yolk, soy sauce, coffee, starch, protein, hormones, serum, antibiotics, enzymes, spices, extracts
Organic chemistry Field of organic chemistry
Inorganic chemistry, such as wax, dyes, detergents, surfactants, pesticides, preservatives, synthetic resins, pigments, etc.
Various fields of fuel cell development for automobiles and ships, such as ferrite, ceramics, photocopying powder, magnetic materials, metal powders, photosensitive materials, various industrial drugs, and sample waste liquids.

Small spray dryer product features :
1. using color large touch screen operation, automatic control and manual control combined, the only domestic:
2. automatic control: one-button start, set the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts itself, the running animation is displayed on the touch screen, the running process is clearly displayed; just press the stop button when shutting down, the machine is automatically safe Shut down.
3. Manual control: If the process parameters need to be adjusted during the experiment, it is convenient to switch to the manual state. The color touch screen is dynamically displayed (animation) throughout the experiment.
4. Shutdown protection function: just press the stop button when shutdown, and the machine will stop running immediately except for the fan to ensure that the heating part will not be burnt out due to misoperation (forced shutdown of the fan).
5. Spray, drying and collection system is made of transparent high-quality borosilicate heat-resistant glass material, so that the spray drying process is carried out in a non-polluting and stable environment, and the whole spray drying experiment process can be directly observed, for scientific research The personnel control the experimental process and the experimental results provide great convenience and can find problems in time. All glass components are easy to disassemble and easy to clean.
6. Built-in imported oil-free air compressor, the particle diameter of the powder is normally distributed, the fluidity is very good, and the noise is very low, less than 60db, in line with the national laboratory noise standard;
7. Two fluid spray atomization structure, the whole machine adopts high-quality stainless steel material precision manufacturing, compact design, no need for auxiliary equipment, convenient use, and lasting as new.
8. In order to meet users' requirements of adjusting various parameters in the experimental range, t real-time PID thermostatic control technology is adopted in the design of drying temperature control, so that the temperature control in the full temperature zone is accurate and the temperature control precision of heating is ±1ºC.
9. In order to keep the sample pure, it is equipped with an air inlet filter.
10. The feed amount can be adjusted by the feed peristaltic pump, and the minimum sample volume can reach 50ml. Magnetic stirrer is optional.
11. The dried powder after drying has a relatively uniform particle size, and more than 95% of the dry powder is in the same particle size range.
12. The small spray dryer is equipped with a nozzle cleaner for the viscous material. When the nozzle is blocked, it will be automatically cleared, and the frequency of the nozzle cleaner can be automatically adjusted.
13. innovative tower wall purge device, material recovery is higher.

Small spray dryer technical parameters:
 

Control mode	Fully automatic control and manual control dual control mode, color touch screen dynamic display (animation) throughout the experiment.
Intake air temperature control	30ºC~300ºC
Outlet temperature control	30ºC~140ºC
Evaporation water volume	1500mL/H~2000ml/h
Maximum feed amount	The peristaltic pump can be adjusted up to 2000ml/h
Minimum feed amount	50mL
Temperature control accuracy	±1ºC, real-time regulation of PID thermostat control technology.
Shutdown protection	Just press the stop button when shutdown, and the machine will stop running immediately except for the fan to ensure that the heating part will not be burnt out due to misoperation (forced shutdown of the fan).
Color LCD touch screen parameter display	Air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / nozzle cleaner frequency
Nozzle diameter	0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional, and can be customized according to requirements
Nozzle cleaner	The small spray dryer is equipped with a nozzle cleaner. When the nozzle is blocked, it will be automatically cleared, and the frequency of the nozzle cleaner can be automatically adjusted.
Structure	The small spray dryer is made of stainless steel, the atomization structure of the two-fluid spray, the spray, drying and collection system is made of transparent high-quality high borosilicate heat-resistant glass material.
Air compressor	Built-in imported oil-free air compressor, the diameter of the powder spray is normally distributed, the fluidity is good, and the noise is very low, in line with the national laboratory noise standard.
Total power	3KW/220V
Tower wall purge device	material recovery is higher
Spray head cooling unit	Optional
Equipment size	1200mm (height) × 650mm (length) × 500mm (width)
Other	1. It can be upgraded to a two-stage separation collection system. 2. It can be directly upgraded to nitrogen circulation system for drying organic solvent materials.

Small spray dryer product pictures:

Q. Are you a manufacturer or a trading company?

A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.

Q. How is your company's product after-sales service system?

A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.

Q. How long is your delivery time? If I want to customize the instrument, how long does it take?

A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.

Q. Our country's power supply and plug are different. How do you solve it?

A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.

Q. How to pay?

A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.

Q. How is the package of goods? Delivery methods?

A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.

 More questions, please contact customer service