| Customization: | Available |
|---|---|
| After-sales Service: | on-Line Service |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The CSS furnace is a double heating zone rapid heat treatment furnace with an 11" outer diameter quartz tube. It is designed for PVD or CSS(close space sublimation) film coating 3 "diameter or 2" x 2". The short distance evaporation coating furnace uses two sets of halogen heaters (top and bottom) with a maximum heating rate of 20ºC/s. Two 30-segment precision temperature controllers are built in with an accuracy of +/-1ºC. Includes RS485 port and control software to allow furnace operation and temperature curve recording via PC. It is the main tool for studying the new generation of thin films for solar cells, such as CdTe, sulfide and perovskite solar cells.
Technical Data of close spaced sublimation deposition system:
| Product name | 5 inch short distance evaporation coating furnace |
| Product model | CY-EVH350JJL-5"-SS |
| Structure | 1. Two temperature controllers are used to control the top and bottom heating elements respectively. A float flowmeter is installed to allow gas to flow into the vacuum chamber 2. Vacuum chamber: 350 mm Dia x 300 mm h, made of stainless steel Observation window: 100 mm diameter Opening mode: front door type 3. Vacuum flange is made of 316 stainless steel, electric lifting 4. Two 5"x5" IR heating plates with adjustable spacing. 5. The top sample holder can be rotated at a speed of 0-7 RPM |
| Heating element and sample board | The heating element consists of 20 infrared lamps, which are located at the top and bottom The distance between the two heating tables can be adjusted by a DC motor In order to reduce heat radiation and achieve a faster cooling rate, the heating element is installed in a stainless steel housing with a water-cooled sandwich (stainless steel housing is made of 316 stainless steel). Aluminum nitride ceramic sheet(5"×5"×0.5mm thickness) with high thermal conductivity is used as the loading platform to achieve better heating uniformity A 5"×5" graphite crucible can be placed on the bottom loading table to hold the evaporated material When using this instrument, it is necessary to use a circulating water cooler (KJ-5300 type, 16L/min). |
| Temperature control system | Two sophisticated temperature control systems independently control the upper and lower heating zones, which can be set up to 30 stages of cooling procedures Every temperature control system comes with ultra-mild break protection |
| Thermoelectric couple | Two type K thermocouples, mounted on the top and bottom, are in contact with aluminum nitride ceramic sheets |
| Operating temperature | Maximum temperature per heater: RT-950ºC. Maximum temperature difference between two heaters: 300C depending on the distance between the two heaters: The maximum distance is 30mm. Temperature difference: 315ºC Heat the bottom only Sample speed: 1-20RPM |
| Flowmeter | Two way float flowmeter 16 -160 mL/m 500 - 5000 mL/m |
| Vacuum pump | Equipped with a molecular pump system, using one-click operation 600L/S, 1x10-5 Torr or more |
| Voltage | 208V 60HZ three-phase |
We can ship the close spaced sublimation deposition system by sea, by air, also can arrange shipment according to your requirements.
Zhengzhou CY Scientific Instrument Co., Ltd. is a comprehensive company integrating design, research and development, production and sales.
Our main products are: spin coater, thermal evaporation coater , magnetron sputter coater, plasma sputter coater, E-beam evaporation coater, PLD pulse laser coating machine, plasma cleaner, CVD system, PECVD system, diamond wire cutting machine, melting furnace/stove, arc melting furnace, etc.
Our products are widely used in the field of materials science research. We have extensive cooperation with domestic universities, laboratories, and new material companies. It has been successfully exported to more than 20 countries and regions including the United States, the United Kingdom, Germany, Russia, Switzerland, Canada, etc. and have established long-term cooperative relationships with local dealers.
If you are conducting materials research, please contact us and we will provide you with customized services to make your research experiments smoother!
Q. Are you manufacturer or trading company?
A. We are professional manufacturer of laboratory instruments, We have professional R&D team and workshop, which can promise the qulaity and after-sale service.
Q. How's your warranty?
A. Our warranty is 12 months, and provide lifetime maintenance. We provide 24 hours on-line service.
Q. How long is your delivery time? If I want to customize the instrument, how long does it take?
A. 5-10 days----in store. Customzied products---It usually takes 30-60 days depending on your requirements.
Q. Power supply and plug?
A. We can provide products accroding to your local voltage and plug standard.
Q. How to pay?
A. T T, L / C, D / P, etc.
Q. How is the package of goods? Delivery methods?
A. Standard export fumigation sign wooden box packaging or as your requirements.
){kind=link}