Furnace Structure
|
- Double layer stainless steel structure for maximum vacuum and safety, which can stand at positive pressure up to 0.06Mpa and vacuum up to - 0.09Mpa
- Water cooling front door and air cooling shell
- Built in Pressure gauge, vacuum valves, and two gas flowmeters
|
Chamber Interior
|
- Five sides heating, e.g. left, right, bottom, back, and front, to achieve better temperature uniformity than three sides heating.
- Energy saving 1500 grade fibrous alumina insulation
- High purity and reflective Al2O3 coating for max energy saving.
- Kanthal 1350°C grade Fe-Cr-Al resistance heating wire
- Heated chamber: 400x 400x 400 mm (~ 16"x16" x16"), 64 Liter
|
Working Temperature &
Constant Temperature Zone |
- Continuous Working Temperature 1100° C
- Maximum Working Temperature 1200°C (< 1 hrs)
- Constant temperature zone:
- +/- 1°C within center 250 mm cubic zone
- +/- 5°C within center 300 mm cubic zone
|
| Maximum Sample Loading |
|
| Temperature Controller |
- FA-YD518P-AG temperature controller is included.
- Proportional-integral-derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
- MET Certified
|
| Temperature controller (optional) |
- MTS02-Y Temperature control software kit (for YD518P series controllers) + brand new laptop package is available at the options bar.
- You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW with +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic left to view the full spec of the Eurotherm temperature controller.
|
Thermocouple
|
- Omega Dual Type Thermocouple
|
| Heating Rate |
- < 10 °C / min recommended
- 20 °C/ min Max.
|
| Temperature Accuracy |
|
Gas flow control &
Vacuum Valve |
- Two larger flowmeters are installed in front panel of furnace to allow two types of gas mixing and flowing at same time
- One KF 25 vacuum port is installed in left of furnace to remove air by vacuum pump before filling gas
- One heavy duty vacuum pump ( CE certified ) built in bottom furnace. You may choose a UL certified pump at extra cost
|
| Water Cooling |
- A 16L/min recirculating water chiller is included for cooling furnace
- Short water power off and Over temperature alarm built in
|
| Power & Working Voltage |
- 9.5 KW, 208 - 240V single phase, 50/60Hz
- Three phase, AC 380V - 460V available upon request.
- Note: Power cable included, but without a plug. Please install a plug by your own
|
| Compliance |
- CE Certified
- All electric components ( >24V) are UL / MET / CSA certified
- The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.( please click mark below to learn details
|
| Dimension & Net Weight |
- H2050mm X W 1280mm x 1200 L
- Net weight: 476 Kg
|
| Shipping Weight & Dimension |
|
| Warranty |
- One-year limited warranty with lifetime support
- We reserve right to upgrade furnace structure for better performance without notice
|
Audited Supplier 
){kind=link}
){kind=link}