Ni-Based Super-Alloy High Temperature High Pressure Hydro-Thermal Reactor

• Customization: Available
• Type: Stainless Steel Heating Equipment
• Certification: CE, TUV
• Model NO.: CY-1100X-RC-NI300
• Brand: Cy
• Pressure Vessel: Ni-Based Superalloy
• Thermocouple: K Type
• Heating/Cooling Rates: =<10c/Min.
• Heating Element: Fe-Cr-Al Alloy
• Warranty: One Year
• Transport Package: Wooden Box
• Specification: 300ml
• Trademark: CY
• Origin: Zhengzhou, China
• HS Code: 85141090
• Production Capacity: 210 Sets Per Month

Product Description

300 mL Ni-Based Super-Alloy High Pressure Hydro-Thermal Reactor 1100 C
CY-1100X-RC-NI300 is a 300 mL reactor made of Ni-based Superalloy, which has excellent creep strength and anti-oxidation. It can reach 1100 °C with a pressure up to 3 MPa under oxygen or inert gasses. It is an ideal tool for preparing advanced material by the hydrothermal method, especially for heat treatment of sample under high oxygen pressure. A solenoid valve is installed on the flange for automatic pressure relief control. Temperature control and pressure monitoring software are included for remote control.
 

Features	Reactor made of Ni-based superalloy, which allows high pressure at high temperature (up to 3 MPa at 1100 °C) Over-temperature alarm and interlock are installed for safe operation Over-pressure alarm is installed. A solenoid valve is installed for automatic pressure relief Temperature control and pressure monitoring software are included for remote control
Input Power	Input voltage: 208 - 240 VAC, 50/60 Hz, single phase 1.5 kW power
Pressure Vessel	Ni-based superalloy hydrothermal reactor with 300 mL capacity.  Made of Ni-based superalloy GH747 Reactor size: 70 mm OD x 35 mm ID x 326 mm H Air cooled flange via aluminum heat radiator A small quartz or alumina boat should be used to load the sample inside the reactor, which increases vessel service life Gold or Ni foil can be used to wrap the crucible boat to minimize contamination to the vessel Optional torque wrench is available to avoid overtightening the flange bolt
Working Pressure	18 MPa            ≤ 800 °C 13 MPa            ≤ 900 °C 8 MPa              ≤ 1000 °C 3 MPa              ≤ 1100 °C
Pressure Monitoring and Relief	Precision high pressure sensor (measurement range up to 25 MPa, or 250 bar) is installed on the pressure vessel. The pressure monitor displays pressure in bar Pressure monitor allows the user to set a high pressure alarm. When the pressure reaches the alarm set point (15 MPa max), alarm will sound and the pressure will be released via a solenoid valve on the flange. For using the reactor with a pressure > 15 MPa at low temperature, please shut off the needle valve near the solenoid valve and use the manual pressure relief valve
Temperature Control & Heater	Working temperature: 1100 °C max (< 1 hour). Continuous working temperature: ≤ 1000 °C Heating/cooling rates: ≤ 10 °C/min Heating zone length: 330 mm Constant temperature zone: 80 mm within +/- 1 °C Heating element: Fe-Cr-Al alloy Thermocouple: K-type (Omega 3 mm OD K Type with high-temperature tolerance (220°C) connector) One digital temperature controller with 30 programmable segments and +/- 1 ºC accuracy
Accessories	SS316 needle valve with 1/4 pipe connector & pressure gauge are included Two consumable Copper Gasket (63 mm OD) are included
Size	340 mm W x 320 mm D x 820 mm H
Net Weight	35 kg
Warranty	One year limited warranty with lifetime support