| Heating Mode: | Dielectric |
|---|---|
| Material Status: | Powder, Solution |
| Atomization: | Gas Atomization |
| Flow: | Parallel Flow |
| Heat Source: | Electricity |
| Type: | Airflow Spray |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Miniature laboratory automatic or manual spray dryer with low noise and excellent drying effect
Introduction of spray dryer:
It is suitable for the production of micro-particulate powder in laboratory of universities, research institutes and food, pharmaceutical and chemical enterprises. It is widely applicable to all solutions such as emulsions and suspensions. It is suitable for drying heat-sensitive substances such as biological products, biological pesticides and enzyme preparations, etc. Since the sprayed material is only subjected to high temperature and instantaneous heating when sprayed into the mist, these active materials maintain their active ingredients unchanged after drying.
Specifically used in the following fields: beverage spices, pigmented milk, egg products, plant and vegetable extracts, pharmaceutical synthesis, heat-sensitive substances, plastic polymers and resins, aromatics, blood products, ceramics and superconductor biochemical products, dyes, soaps And detergents, food adhesives, oxide bone powder and tooth powder, graphene and so on.
2. Equipment advantages:
Original imported nozzle, high efficiency.
Color large touch screen operation, combination of automatic control and manual control, Chinese and English panel, parameter LCD display.
Real-time PID constant temperature control technology, accurate temperature control, heating temperature control accuracy ± 1 ºC.
The spraying, drying and collecting devices are made of transparent high-quality high-temperature resistant high-borosilicate glass, and the entire spray drying experiment process is visible.
The atomization structure of the two-fluid spray, made of high-precision 316 stainless steel, the particle diameter of the powder spray is normally distributed, and the fluidity is good.
The jet is automatically cleared (Nozzle Cleaner) and the frequency is adjustable. When the nozzle is blocked, it will be automatically cleared to ensure the continuity of the experiment.
The feeding amount can be adjusted by feeding peristaltic pump.
Special protection function, the fan does not start, the heater cannot start, the fan air volume is adjustable.
Built-in imported oil-free air compressor, the noise is less than 50db.
Equipped with air inlet filter to ensure sample purity.
The particle size of the dried product is uniform, and more than 95% of the dry powder is at the same particle size.
The double separator separates the sample. Double sample bottle collection to improve sample collection rate.
Technical parameters of spray dryer:
|
Inlet air temperature control |
30~300ºC |
|
Outlet air temperature control |
30~150ºC |
|
Evaporated water |
1500mL/H ~ 2000ml/h |
|
Maximum feed volume |
2000mL/H |
|
Minimum feed volume |
50mL |
|
Feeding method |
peristaltic pump adjustment |
|
Average drying time |
1.0~1.5S |
|
Electric heater power |
4KW AC220V single-phase ground |
|
Fan |
0.55KW air volume 105m3/min wind pressure 19(kpa) |
|
Air compressor |
0.55KW gas production 4.2 m3/h |
|
Working pressure of compressed air |
2~4Bar |
|
Equipment dimensions |
1300mm (H) × 650mm (L) × 800mm (W) |
|
Nozzle diameter |
0.5mm/0.75mm/1.0mm/1.5mm/2.0mm optional 1 standard 1.0mm |
|
Equipment weight |
155KG |
Related photos of spray dryer:
Q. Are you a manufacturer or a trading company?
A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.
Q. How is your company's product after-sales service system?
A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.
Q. How long is your delivery time? If I want to customize the instrument, how long does it take?
A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.
Q. Our country's power supply and plug are different. How do you solve it?
A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.
Q. How to pay?
A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.
Q. How is the package of goods? Delivery methods?
A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.
More questions, please contact customer service
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}