Elastic Modulus Tester Accurately Detect The Elastic Modulus of Various Refractories

• Frequency Range: 10Hz~20kHz
• Measurement Accuracy: 1%
• Young′s Modulus E Measuring Range: 5~300gpa
• Shear Modulus G Measuring Range: 5~300gpa
• Poisson′s Ratio U Measuring Range: Add or Subtract 10%
• Transport Package: Wooden Case
• Specification: 176mm x 350mm x 356mm
• Trademark: CYKY
• Origin: Zhengzhou, China
• HS Code: 9013809000
• Production Capacity: 200

Product Description

Elastic modulus tester accurately detect the elastic modulus of various refractories


Instrument introduction of Elastic modulus tester :
The instrument adopts dynamic non-destructive testing method, which can accurately detect the elastic modulus of various refractory materials, such as high alumina brick, high chrome brick, magnesia brick, magnesia chrome brick, magnesium aluminum brick, silicon carbide product and various castables. Also suitable for testing ceramic materials, graphite materials, etc. According to the test temperature, it is divided into normal temperature test type and high temperature test type.

Technical parameters of Elastic modulus tester :
Main technical parameters:

parameter model	CY-DEMT-2010	CY-HEMT-1401	CY-HEMT-1403	CY-HEMT-1601	CY-HEMT-1603
Test temperature	Room temperature RT	RT~1400ºC		RT~1600ºC
Frequency Range	10Hz~20kHz
Measuring range	Young's modulus E	5~300GPa
	Shear modulus G	5~300GPa
	Poisson's ratio μ	±10%
measurement accuracy	1%
Sample size	Standard sample:40×40×160;25×25×150,mm   Other samples: should meet the length / thickness ≥ 3,L/T≥3
Number of samples	Continuous, no limit	1 / heat	1 to 3 / heat	1 / heat	1 to 3 / heat

Main performance of Elastic modulus tester:
1. The high temperature furnace adopts the Tianyuan local structure (new furnace type);
2. The sample can be automatically tapped by a special tapping device at the bottom of the test furnace;
3. The temperature of the high temperature furnace can be automatically raised, kept warm, and shut down;
4. The frequency acquisition is automatically performed by the special signal collecting device above the sample, and the measurement and control software automatically performs conversion and analysis after the data is collected;
5. The control system adopts industrial IPC computer for automatic control. The measurement and control software is based on WindowsXP system, which automatically records test results, and can perform intelligent data processing, mathematical model fitting and data processing;
6. Fully realize the analysis and test of the dynamic characteristics of the test piece, and visualize and automate the whole process;
7. The instrument has high measurement accuracy, reliable data, strong readability, clear resonance frequency spectrum, and can read any peak frequency and elastic modulus.
8. From the map analysis, you can understand the defects of the test piece structure. If there are several peak frequencies in the spectrum, the test piece has cracks and voids, such as cracks, gaps, loose structure, etc.;
10. The instrument can perform multiple non-destructive continuous tests on the same sample. After the test, the sample can still be used for other performance tests, and can be tested on different sizes of samples.
Product pictures of Elastic modulus tester :

Founded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.

We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.

Q. Are you a manufacturer or a trading company?

A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.

Q. How is your company's product after-sales service system?

A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.

Q. How long is your delivery time? If I want to customize the instrument, how long does it take?

A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.

Q. Our country's power supply and plug are different. How do you solve it?

A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.

Q. How to pay?

A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.

Q. How is the package of goods? Delivery methods?

A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.

More questions, please contact customer service.