High Temperature Wear Resistance Tester Meet The Room Temperature to 1600c Normal Temperature and High Temperature Wear Resistance Test

• Sandblasting Distance: 203mm
• Sandblasting Pipe Specifications: 4.8*115mm
• Test Pressure: 448kpa
• Laboratory Pressure: 311PA
• Transport Package: Wooden Case
• Specification: 176mm x 350mm x 356mm
• Trademark: CYKY
• Origin: Zhengzhou, China
• HS Code: 9013809000
• Production Capacity: 200

Product Description

High temperature wear resistance tester meet  the room temperature to 1600C normal temperature and high temperature wear resistance test


Instrument introduction of High temperature wear resistance tester :
Industrial furnaces such as blast furnaces, cement kiln, lime kiln, circulating fluidized bed boilers and other refractories for furnace lining, due to long-term effects of material impact, friction and airflow impact, friction, etc., cause lining materials to erode and wear, often causing equipment leakage, Damage has many adverse effects on industrial production. This phenomenon does not occur at room temperature, and the wear mechanism changes due to the material's evolution from rigidity to plasticity, structure, strength, etc. at high temperatures.
As an important physical property of the material, wear resistance is the ability of the refractory to resist the friction and wear of hard materials or gases (including solid materials), and is used to evaluate the performance of the refractory under wear and scouring conditions.
HAT high temperature wear tester can meet the test test of room temperature to 1600 °C normal temperature and high temperature wear resistance.

Technical parameters of High temperature wear resistance tester :
Main technical parameters:

parameter Model	CY-NMJ-02	CY-HAT-12		CY-HAT-13	CY-HAT-14	CY-HAT-16
Test temperature	RT	RT~1200ºC		RT~1300ºC	RT~1400ºC	RT~1600ºC
Temperature control accuracy	-	±1ºC
Air preheating temperature	-	1000ºC
Furnace temperature fluctuation during sand blasting, recovery time	-	±5ºC,3min
Sandblasting quality	1000±5g
Sandblasting time	450±15s
Sandblasting distance	203mm
Sandblasting pipe specifications	4.8x115mm
test pressure	448kPa
Laboratory pressure	311Pa
Number of samples	continuous		3 pieces / furnace

Mainstream model equipment selection guide:

Normal temperature wear resistance tester	CY-NMJ-02	Test temperature RT at room temperature, the number of single test samples is continuous, unlimited
High temperature wear resistance tester	CY-HAT-12	Test temperature room temperature RT ~ 1200 ° C, the number of single test samples 3
	CY-HAT-13	Test temperature room temperature RT ~ 1300 ° C, the number of single test samples 3
	CY-HAT-14	Test temperature room temperature RT ~ 1400 ° C, the number of single test samples 3
	CY-HAT-16	Test temperature room temperature RT ~ 1600 ° C, the number of single test samples 3

Instrument characteristics description of High temperature wear resistance tester :
1. The testing machine is mainly composed of a compressed air preheating system, a sample carrying mechanism, a sample heating mechanism, an abrasive spray gun mechanism and an exhaust gas cooling and purifying mechanism;
2. Test principle: Under the action of preheated compressed air flow, a certain amount of wear medium is accelerated to be sprayed, and the impact has been heated to a high temperature sample. After the sample is cooled to room temperature, the surface of the test sample is worn. The volume of the drop;
3. The abrasive spray gun mechanism uses the Venturi effect to accelerate the wear medium, so that the wear medium spray is stable and reliable;
4. The sample carrying mechanism can carry out the test of 3 samples/furnace, using automatic or manual injection control;
5. The compressed air supply and storage mechanism adopts the principle of air preheating to make the furnace temperature fluctuate small, stable and reliable during the test, and the bottom collector is convenient for collecting after the wear medium is sprayed;
6. The furnace body also adopts the exhaust gas cooling and purifying system to achieve the effect of dust removal and environmental protection.

Product pictures of High temperature wear resistance tester :

Founded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.

We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.

Q. Are you a manufacturer or a trading company?

A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.

Q. How is your company's product after-sales service system?

A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.

Q. How long is your delivery time? If I want to customize the instrument, how long does it take?

A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.

Q. Our country's power supply and plug are different. How do you solve it?

A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.

Q. How to pay?

A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.

Q. How is the package of goods? Delivery methods?

A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.

More questions, please contact customer service.