Rapid Heated Pressing (VRHP) Furnace with Stainless Steel Vacuum Chamber

• Customization: Available
• Application: School, Lab
• Customized: Customized
• Model NO.: CY-OTF-1700X-RHP4
• Structure: Portable
• Material: Steel
• Type: Heating Mantle
• Ertical Move Distance: 35mm
• Piston Diameter: 60mm
• Output Frequency: 30 ~ 80 kHz
• Processing Chamber: Stainless Steel
• Digital Pressure Gauge: 10MPa
• Thermocouple: B Type
• Warranty: One Year
• Duty Cycle: 80%
• Air Cooling: Fan
• Transport Package: Wooden Box
• Specification: dia. 260mm
• Trademark: CY
• Origin: Zhengzhou, China
• HS Code: 85141090
• Production Capacity: 210 Sets Per Month

Product Description

Rapid Heated Pressing (VRHP) Furnace upto 1600ºC & 5T with Stainless Steel Vacuum Chamber - OTF-1700X-RHP4
OTF-1700X-RHP4 is a Vacuum Rapid Heated Pressing Furnace (VRHP or RHP) designed for making dense pallets under vacuum or the protective gas environment. A 15 kW temperature controllable induction heater is integrated into the system, which provides sufficient power for rapidly heating the graphite pressing die up to 1700 ºC. The Induction coil is built inside of stainless steel vacuum chamber. An electric hydraulic press is inserted from the bottom of the chamber, providing up to 5 tons pressing force.

Max. Pressure	5 metric tons (10 MPa on pressure gauge).
Hydraulic Electrical Presser	Piston diameter: 60 mm. Vertical move distance: 35 mm. Automatic pressure controller
Induction Heater	Working voltage: 380 VAC, 50/60 Hz, three phase. Working current: 40 A (with a 60 A breaker). Maximum oscillating power: 30 kW. Maximum input power: 15 kW. Output frequency: 30 ~ 80 kHz. Duty cycle: 80%. Max. Working Temperature :  1600 ºC max duration time: < 30 min. Air cooling: fan. Protection: water pressure monitoring, high-temperature protection, and overpower protection.
Temp. Controller	Working voltage: 208 ~ 240 VAC, single phase. Precision digital temperature controller with automatic PID tuning. Temperature profile that contains maximum 30 programmable segments to control heating, dwelling, and cooling. Overheating and pyrometer failure protection. Temperature accuracy: ± 10 ºC.  B-type thermocouple. Continuous working temperature range: 1000 ~1700 ºC. Experimental maximum heating rate in vacuum (only for 0.5" inner diameter graphite pressing die; without any thermal block):
Processing chamber                &      Sealing Flange	Stainless steel vacuum sealed chamber: 260 × 230 × 320 mm (OD × ID × L).  Flanges on both ends of the chamber. Flanges have a tunnel for cooling water. Equipped with a KF-25D vacuum port, pressure gauge, 1/4" gas inlet port with stainless steel needle valve. The upper flange can be lifted by raising the lead screw which provides the easy access to retrieve the graphite die. Requires at least 55 liters per minute water flow. Please click on the picture below to order at an extra cost.
Digital Pressure Gauge	Maximum pressure display is upto 10 MPa.
High-Temperature Graphite Pressing Die Set	Two built-in graphite supporting rods. One set of 0.5" (inner diameter) graphite die are included for immediate use. Made of high purity graphite by HIP processing, Max. Pressure for the die is 50 MPa, and Max. Load from the hydraulic press is dependent on die 's ID 0.5"ID   Max.  0.5T 1.0 ID:   Max.  3T
Dimensions	800 × 800 × 1300 mm (L × W × H).
Net Weight	350 kg.
Warranty	One year limited standard warranty