High-Voltage Power Supply for Melt-Blown Non-Woven Electrostatic Electret Equipment

Product Description

High-voltage power supply for melt-blown non-woven electrostatic electret equipment

 

Product description of High voltage power supply
CYKY-TD2202 is a special high-voltage power supply for electrostatic electret equipment in the melt-blown nonwoven industry. Adopt digital control mode, full abnormal slow start, nanosecond arc-response ability to ensure the melt-blown production line is fault-free and long-term operation The high stability can make the ionization effect more stable. The customer feedback of the TD2202 series high voltage power supply equipment can reach the BFE99 standard.

Features of High voltage power supply
Optional output voltage 60kV / 100kV (other voltages can be customized)
Output current 20mA
One-key operation function
High-speed mode / abnormal self-judgment / parameter self-test function
No melting hole mode
RS-485 isolated digital communication
Safety interlock function

Application of High voltage power supply
Melt blown non-woven fabric with static electricity;Electrostatic separation;Electrostatic elimination

Technical parameters of High voltage power supply

Input	AC220V±10%,16A ,50/60Hz
Output	60kV or 100kV optional, positive or negative optional
Manual mode	Front panel of power supply: the power supply has its own rotary encoder, which can set the output voltage / current from 0 to the rated value. External analog control: An external 0 to 10V control signal can set the output from 0 to rated value. Digital communication control: the output can be set from 0 to rated value according to standard communication protocol through RS-485 communication interface.
One-click operation	In one-key operation mode, the power supply will work with relatively good voltage and current. At this time, the operating parameters are not fixed and will automatically change with the environment. If the effect is not good, you can cancel this function and use manual mode to manually adjust the voltage and current
High-speed mode	The power supply has enabled this mode by default. In this mode, the power supply will work at the fastest exception handling speed to avoid the exception handling that is too slow and leads to an increase in product defect rate.
No-melt mode (under development	Press and hold to light up to start the non-melting hole mode. This mode will make the power supply work in an intelligent judgment state, which can avoid some ignition situations.
Abnormal self judgment	Intelligent exception judgment processing, in the case of such abnormalities as over-voltage, over-current, short circuit, arcing and overheating, will choose its own working mode.
Parameter self test	This function is suitable for the debugger to use this device for the first time. Long press this button until the voltage has no obvious fluctuation. Release this button, then the voltage and current at this time are the reference working parameters.
Setting	Accept customer's special customized function
Voltage / current adjustment rate	relative load / input: 0.01%
Ripple voltage	better than 1% rms at rated voltage
Temperature	Working temp0 ºC ~ 50 ºC; storage temp: -20 ºC ~ 80 ºC.
Dust environment	need to add some filtering devices.
Temperature coefficient	usually 100ppm per degree Celsius
Stability	After half an hour of start-up, it is better than 0.05% every 8 hours.
Humidity	10-90% without condensation.
Voltage and current indication	four-digit LED digital tube, under rated output conditions, the error is 1% ± 1 word.
Protection	It has basic protection functions such as overheating, overvoltage, overcurrent, short circuit, arc drawing, etc. Other required protection functions can be customized.
High-voltage connector	The recessed plastic insulated conduit and the high-voltage cable penetrated are connected by a 16mm / 28mm diameter metal connector. The total length of standard high-voltage cable is 2m (other lengths can be customized).
Dimensions	60kV: 482mm wide, 133.5mm high and 320mm deep. 100kV: 482mm wide and 133.5mm high and 500mm deep.
Weight	20kg ~ 30kg

Detailed pictures of High voltage power supply





Founded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.

We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.





Q. Are you a manufacturer or a trading company?
A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.

Q. How is your company's product after-sales service system?
A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.

Q. How long is your delivery time? If I want to customize the instrument, how long does it take?
A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.

Q. Our country's power supply and plug are different. How do you solve it?
A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.

Q. How to pay?
A.T / T, L / C, D / P, etc., it is recommended to use Trade Guarantee.

Q. How is the package of goods? Delivery methods?
A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.

More questions, please contact customer service